Light Grey

Dark Grey

Red Oxide

This primer is designed for airless/air-assisted spraying, but can also be used with compliant spray guns. The VOC content of QD Universal Primer is low at 0.473kgs/lt and will only require 1-2 coats.

It is available in pallet sized deals comprising of 100 x 5lt or 24 x 20lt tins. The colours available are light grey, dark grey or red oxide.

Corrofast QD Universal Primer provides a competitively priced, high quality, quick drying surface coating, which is easy to apply, has high durability, and a low VOC content.

{phocamaps view=map|id=1}

tel: 0161 205 7631
email: findoutmore@corrofast.com
twitter: twitter.com/corrofast

Product Code: PRICORFAST

Product Description:

Corrofast QD Universal Primer is a quick drying coating offering good adhesion and corrosion protection.


Corrofast QD Universal Primer is designed for airless application to steelwork etc. It is easy to apply without fear of runs or
sags at high wet film thickness.

Special Properties:

Good long term durability

VOC Information:

MAXIMUM VOC CONTENT (RFU): 0.500kgs/ltr
REGULATIONS / COMPLIANCE:  2004/42 IIB (C) 540

Colour Range:

Light Grey, Dark Grey, Red Oxide

Packaging

  Pallets: Comprising of 100 x 5lt or 24 x 20lt

Technical Information:

Flashpoint: 25°C
Storage: 12 months in original sealed containers

Preperation/Cleaning:

Ensure surfaces to be coated are dry and free from all traces of contaminants.
HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process.
Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Please refer to Knowledge Base on our website for details on Surface Preparation

Health and Safety:

Refer to MSDS and tin label prior to use.
Suitable respiratory equipment should be worn when spraying.
Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting lid.

Application Methods

Airless/Air Assited                         Compliant Spray Gun

Mixing Ratio

                 RFU                                                    Base
                                                                              Hardener <10%

Thinner Options

                                                                             Thinner 2621

Viscosity

Spray Gun Setup

               13-15 thou 40/50°                               1.8-2.0 Fluid Tip

               1-2  Full Coats                                     1-2 Full Coats

Flash Off

             10-15 mins between coats                  10-15 mins between coats


Drying Time
        Touch dry - 15-25 mins@20°c                      Touch dry - 15-25 mins@20°c
        Hard dry - 3 hours@ 20°c                              Hard dry - 3 hours@ 20°c
        Full dry - 12 hours@ 20°c                              Full dry - 12 hours@ 20°c

Recoatability/Overcoating

            1 hour minimum @ 20°c                        1 hour minimum @ 20°c


Wet Film Thickness

           100 microns                                               100 microns

           55 microns                                                  55 microns

Colours shown are for reference only, Corrofast Coatings cannot guarantee final paint colour  will match that represented on screen and advise testing a small area prior to use.

Sorry, but the content you requested could not be found

However your in the right place for finding out about high quality paints and coatings.